|
PICPROTO™ prototyping boards
- High-quality blank prototyping boards for PICmicro® microcontrollers
- Holds PICmicro, 5-volt regulator, oscillator, capacitors, DB9-25 connector
- Large prototyping area
- Double-sided board with plated-through holes
- Solder mask on both sides makes soldering easy
- Silkscreen legend on the top side to ease parts placement and wiring
- Includes documentation sheet with schematic
|
Select by size of microcontroller:
|
Get your PICmicro® projects running quicker and easier!
 PICPROTO™
prototyping boards are designed to help you get your PICmicro® projects up and running faster and easier. There is a high-quality blank
PICPROTO board for most every PICmicro microcontroller. Each double-sided board has a solder mask on both sides and hundreds of plated-through holes for your parts.
The PICmicro I/O pins are brought to the edge of a large prototyping area and labeled for quick identification. Each
PICPROTO board is pre-wired to hold your favorite PICmicro, 5-volt regulator, capacitors and the oscillator crystal, RC or ceramic resonator. At the bottom edge of each board is a place for a DB9-25 RS232 style connector. A documentation sheet is included showing suggested parts and placement and a schematic.
Thousands of our inexpensive PICPROTO boards are making life easier for PICmicro
developers all over the world.
PICPROTO Parts Kit - $8.95
 A kit of the common parts used to assemble
PICPROTO boards.
Includes: 5-volt regulator, 4MHz crystal, 20MHz crystal, (2)22pF capacitors,
0.1uF capacitor, 1.0uF
capacitor, 10.0uF capacitor, red LED, 470 ohm resistor, 1K ohm resistor, and 9V battery clip. |
|
