LAB-X1 Experimenter/Lab Board - $199.95 (assembled)
 The
LAB-X1 is microEngineering Labs, Inc.'s first pre-assembled experimenter's platform. While PICPROTO
boards allow you to create your own projects with a minimum of hassle, the LAB-X1 goes one step further. It provides an assembled testbed containing most of the circuitry commonly used with
PICmicro® microcontrollers
(MCUs).
The LAB-X1 contains the circuitry required by the PICmicro to operate: 5-volt power supply, oscillator, reset circuit, as well as additional application circuits. The crystal controlled oscillator includes jumpers to set speeds of 4MHz, 8MHz, 10MHz, 12MHz, 13.32MHz, 16MHz and 20MHz.
Application circuits include a switch matrix, potentiometers, LEDs, LCD module, serial
EEPROMS*, real time clock*, temperature sensors*, servo connectors, RS232 interface, RS485
interface*, IR interface* and speaker. A prototyping area is also included in case we missed your favorite circuit.
*Some applications require additional devices that are not
included with the LAB-X1. See below for
details.
Many different projects may be created using the LAB-X1. Some examples include calculators, LCD clock, digital thermometer, LCD backpack, tone dialer, TV remote control and many more. The LAB-X1 can run programs written in assembler, C and PICBASIC™
or PICBASIC PRO™.
The LAB-X1 includes in-circuit programming
connectors so the resident PICmicro MCU may be reprogrammed on the fly (requires flash device) using programmers that support this feature. Because the LAB-X1 itself is not a programmer, a separate PICmicro microcontroller programmer, such as the
melabs USB Programmer is required to program a PICmicro MCU.
All of the PICmicro MCU I/O pins are brought out to headers next to a 40-pin ZIF socket. This allows connection to off-board circuits as well as allowing on-board circuits to be connected to other pins, if desired. The LAB-X1 is designed to work with 40-pin PICmicro MCUs, but may be jumpered to work with smaller devices. It is recommended the LAB-X1 be used with the 40-pin
PIC16F877A (available separately). This flash device has 8K of code space, 33 I/O pins, 8 ADC channels and may be reprogrammed again and again.
The PIC16F877A is recommended for
use with the LAB-X1.
Features:
- Inputs: 16 switch keypad, 3 potentiometers, IR, temperature, real time clock
- Outputs: LED bargraph, 2x20 LCD module, speaker, DTMF, PWM, IR, 2 RC servo connectors
- I/O: RS232 interface, RS485 interface
- Serial EEPROM: I2C, SPI, Microwire
- Misc: Reset button, 5-volt regulator, 40-pin ZIF socket for PICmicro MCU (device optional)
- Jumper selectable oscillator from 4MHz to 20MHz
- In-circuit programming/debug connectors
- Prototyping area for additional circuits
- Available assembled, as a kit or as a bare PCB
- Size is 5.5" x 5.6"
|
The standard version includes:
- 40-pin ZIF socket for PICmicro MCU (device optional)
- 5-volt regulator
- Jumper selectable oscillator from 4MHz to 20MHz
- Reset button
- 16 switch keypad
- 3 potentiometers
- LED bargraph
- 2 line by 20 character LCD module
- Speaker
- 2 RC servo connectors
- RS232 interface
- Socket for RS485 interface (device not included)
- Socket for I2C serial EEPROM (device not included)
- Socket for SPI serial EEPROM (device not included)
- Socket for Microwire serial EEPROM (device not included)
- Socket for real time clock/serial analog to digital converter (devices not included)
- Socket for Dallas 1620/1820 temperature ICs (devices not included)
- EPIC™ in-circuit programming connector
- Wiring for Microchip in-circuit debug connector
- Prototyping area for additional circuits
|
LAB-X1 Pricing |
| LAB-X1 Assembled (includes schematic)
sample programs |
$199.95 |
Add
To
Basket |
| LAB-X1 Kit* (includes parts and
schematic) |
$139.95 |
Add
To
Basket |
| LAB-X1 Bare PCB only* (With surface-mount oscillator
multiplier attached, schematic.) |
$49.95 |
Add
To
Basket |
| AC Adapter for LAB-X Boards |
$9.95 |
Add
To
Basket |
|
The LAB-X1 is also available in
convenient, cost-saving bundles.
See the Product Bundles page.
|
Educational Pricing
Educational pricing is available to educational institutions and students with valid student
ID. Educational pricing is not available online. Contact
us to obtain the discount.
- LAB-X1 assembled - $150.00
- LAB-X1 kit with parts* - $105.00
- LAB-X1 Bare PCB only* - $37.50
|
|
* The bare PCBs and kits include the surface mount PLL clock multiplier already soldered in place.
|
|
|
Connect
to the Microchip ICD or ICD2!
